1000Watt Fazer Machine For Haze Effect

This 1000W Fazer Machine is multifunctional. It have founding aluminums of heater, whisht and high quality of pump, high precision of PCB and manipilative fans. High-efficient technology heater using less liquid: less than 1 Liter if spray out with 2 hours (30% output)

Fazer machine information

Heat-up Time: 12 minutes
Fluid Consumption rate: 45min./Liter(100%)
                                       2Hrs.liter(30%)                    
Time and ration control & DMX512
Tank capacity: 2.5L,
Weight: 21KG
Output: 3500cu.ff/mi
Voltage: AC110V, 220-250V 50/60Hz
Powder: 1000W  

Time and ration control operation

1. Put the circuitry control in the back of the machine, the machine begins heat up ,the screen shows ”warming up”, when it finished, the screen shows ”ready to faze”
2. Press “manual” ,the machine starts to smoke press it not stop it smoke continually.
3. Press :Volume” ,it smokes continually ,you can adjust the volume of the fog by ↑↓.
4. Press “Timer”, it shows” Interval…s”, it shows interval time.

Operation

1. Connect the power line to the power socket with earth line. Turn the switch at “On”and the machine heat. The machine begins to heat up ,the screen shows :warming up”
2. When heat up is finished, the screen shows “Ready to hazer”.
3. According to “circuitry control operation” to adjust the volume of the fog and the interval time.
4. Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to people directly and the lean angle should less than 15..
5. Often check whether there has enough fog liquid in machine. The operation will make big damage to the machine if there has no fog liquid.
6. If the fog is small, plum has noise or there has no fog, please power off and check fog liquid, fuse, the connector of remote console and power plug. If the problem could not be solved after check these parts, please stop check and send it back to distributor for repair.

 Repair

 1. Please clean the fog machine timely to avoid the damage of spare parts and decrease the repair charge.
  2. Don’t make the fog machine be dirty. Screw the cover of liquid can after add fog liquid.
  3. After about 40 hours continually use, please use 80% distilled water and 20% vinegar to clean the dirty in refractory pipe.
  4. Disassemble the spray mouth and use vinegar to clean it to keep expedite before heat.
  5. Reequip the spray mouth after cool and add fog liquid for next use.