MLB AB serise Remote Fog Machine 900W 1200W 1500W Hot Sells Whlesale Smoke Machine

MLB Fog Machine Factory is a professional manufactorer of fog machine, haze machine, low fog machine, bubble machine, snow machine, foam machine, confetti machine, fire machine, CO2 machine and dry ice machine, as well as fog liquid, haze liquid, bubble liquid, snow liquid and so on.

Our factory found in 1995, with 21 years experience in producting Fog machine, you can know how professional we are!

This is our AB series Fog Machine with both Wire controller and Wireless Remote Controller.

Fog machine Specification

Installation

1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog liquid will damage fog machine.
4. Plug the plug of remote console in the socket of the back of machine.

Operation

1. Connect the power line to the power socket with earth line. Turn the switch at “On” and the machine heat. The red LED of line console will light once the machine finish heat.
2. Press red key, the machine will spray fog (Press it as long as you need).
3. The red LED of remote console light or not means the machine can spray fog or heat itself. 
4. Can set the machine at a high place (with hanger) or on the ground. Do not spray fog to people 
directly and the lean angle should less than 15.
5. Often check whether there has enough fog liquid in machine. The operation will make big  damage to the machine if there has no fog liquid.
6. If the fog is small, plum has noise or there has no fog, please power off and check fog liquid, fuse, the connector of remote console and power plug. If the problem could not be solved after check these parts, please stop check and send it back to distributor for repair.

Repair

1.  Please clean the fog machine timely to avoid the damage of spare parts and decrease the repair charge.
2.  Don’t make the fog machine be dirty. Screw the cover of liquid can after add fog liquid.
3.  After about 40 hours continually use, please use 80% distilled water and 20% vinegar to clean the dirty in refractory pipe.
4. Disassemble the spray mouth and use vinegar to clean it to keep expedite before heat.
5.  Reequip the spray mouth after cool and add fog liquid for next use.